I made this as a simple single purpose tool to aid in inverting parts that are upside down when assembling PCB’s by hand. The component are first dumped into the front tray, all right side up parts are then placed, the button front is then pressed to clam shell the back plate forward, both move…
Month: March 2023
Struggling with memory a “bit”
It’s March 20th 2023, I finally got around to soldering a PCB for the cable tester project. This was the first rev E board and was intended to be placed with the in progress pick and place machine but I broke the camera last week so I finished the parts by hand and reflowed it…