A manually operated injection molding machine to make low volume prototype injection molded parts. It uses a PID controller and solid state relay to send power to three nozzle heaters on an aluminum tube. Thermoplastic pellets are added to the tube and a lever attached to a stainless steel rod forces the then heated pellets…
Category: CAD/CAM
String Cutter
An automated Standalone String cutter. it uses a 12v barrel connector PSU, Arduino nano, 2x nema 17 stepper motors, 2x drv8825 drivers, a hm11 BLE module and a PCB to connect everything. The rest is 3d printed. Quarters are stacked on top of a razor blade and raised. string is fed from a stepper to…
Electronics Case
Design of a case to house electronics. 3d printed for initial testing. mold design and production with injection molding for large scale distribution.
Nova
A wireless long range single channel radio for manually deploying a drone parachute. I designed this radio to have a long lasting rechargeable battery, have a quick double tap deployment and, simplistic small exterior.
Mayday
Automated drone parachute deployment system. Detects if a drone is free falling or tumbling and deploys a parachute.
Vibration Plate
Reverse engineering of a broken component and reproduced using 3d printing.
Caribiner
A small aluminum caribiner and retainer spring for single handed use that can hold over 700Lbs with a final production test over 900Lbs.